Tuesday, 6 November 2012

Tutorial: How to make a Monty Python Silly Walks clock

I've received an overwhelming response to the Silly Walks clock I made. I was inspired by this wristwatch. It's great that so many people like my clock, and also to see how many Monty Python fans there are out there! This is an in-depth tutorial on how to make the clock. If you have any questions, there is a FAQ page, and I'm happy to answer any additional questions you might have.

Also, once you've finished your clock, please send me a photo! I would love to see your clock, and if you want, I'll add it to the page with other people's silly clocks :).

Here we go!

Finished clock

Table of contents

Preparation: Materials needed
Step 1: Decoupage the clock's face
Step 2: Make the clock hands
Step 3: Assemble the clockwork
Step 4: Add the hands





Preparation: Materials needed



Necessary:

  • 20x20 cm 3D (deep) canvas (or any size you might want)
  • Clockwork and hands
    • Tip: buy cheap clock hands, because you're going to cut them up later
    • Note: You might not need to buy hands, it depends on what clockwork you have
  • Decoupage glue/varnish 
    • I used matte glue/varnish because I prefer a less shiny look
  • Decoupage brush
    • Tip: Use a fine, wide brush for the best and fastest application of glue/varnish
  • Regular glue
    • For gluing the printed legs to the clock hands
    • Plastic, extra sturdy
      • This is for making the clock hands
      • Tip: A sturdy plastic folder you can cut up works fine
      • The clock face with numbers and John Cleese's upper body and the legs for the clock hands printed on regular paper
        • I used a laser printer - please note that inkjet printers can cause difficulties when decoupaging (see the FAQ for more info)
        • My source files can be downloaded here
          • If you want the easiest solution: just print the two files with A4 in the filename on regular A4 paper, and they will be perfectly sized for a 20 x 20 cm canvas
          • The font used for the numbers is Janda Safe and Sound

      Useful:

      • Awl
        • This is for making the hole for the clockwork
      • Razor blade and scissors
        • This is for cutting out the legs, and other things that need cutting
        • Wire cutters
          • This is for cutting the clock hands
        • Small brush
          • This is for doing touch-ups
        • Black marker
          • This is for hiding white edges (e.g. on the clock hands)
        • Optional: A spray bottle with water
          • This is for getting a better result when doing decoupage




        Step 1: Decoupage the clock's face


        Start off by creating the clock's face. 

        Print the numbers and John Cleese's upper body on regular paper. I used a laser printer. If you printed using an inkjet printer you might experience some problems with smudging - see the FAQ page for more info.




        Cut the clockwork paper to about the same size as the canvas' front. Make it slightly larger. 


        For this step you're also going to need all the decoupage material from the materials list above:
        • Decoupage glue/varnish
        • Decoupage brush
        • Optional: spray bottle with water
        • Canvas
        Lay out the canvas and the clockwork print on something you can throw away later, in order to protect the table/floor/wherever you choose to work (I work on the floor). As you can see, I put the clockwork print on an old plastic bag because I'm going to get it wet.


        Optional: Spray a good amount of water on the clockwork paper and let it soak it in. This is for reducing the risk for getting bubbles when you later put glue on the paper. However - beware! - this makes the paper much more fragile than when dry, and you risk ripping it when you add it to the canvas. So be careful!



        Paint a generous amount of glue/varnish on the canvas while the clockwork paper is soaking the water. Make sure you get an even spread all over the canvas.


        Carefully (!) place the clockwork paper onto the canvas. Make sure to place it straight, and neatly along the edges. You can take it off and redo it, but this increases the risk of ripping the paper (believe me...).


        When you're satisfied with the placement, use your hands to carefully press out any air bubbles (remember that the paper is fragile so be light to the touch). 



        Paint a generous amount of glue/varnish onto the paper as well. Make sure to spread it evenly. Also press down the corners properly so that they lie flat against the canvas and become as invisible as possible.


        Let the canvas dry (I left it over night to really make sure it dried properly). You can always add another coat of glue/varnish after the first has dried if you find that you missed a spot.



        Step 2: Make the clock hands

        Next, you should make the clock hands. For this you will need the following from the list above:

        • The legs printed on regular paper
        • Sturdy plastic sheet (or a sturdy plastic folder)
        • Decoupage glue/varnish
        • Decoupage brush
        • Optional: Spray bottle with water
        • Razor blade

        Note: For the first clock I made I used a sturdy plastic folder for this, but the legs had a tendency to bend. Therefore, this time I bought sturdy plastic sheets from my local crafts store, in the hope that it would be better (it wasn't). Others have told me that they used plastic folders successfully (though sturdier than the one I used at first), and I did a third try that worked well. However, I can't help but think that some kind of thin metal or a material like that is even better for this. Thus, if you find something better, please let me know! 






        Using a plastic sheet

        Using a sturdy plastic folder

        Cut out the legs in a rough shape. Make sure to leave quite some white space around them (it's just to make life simpler). Cut out a large enough piece of plastic.



        Just as when doing the clock face, spray water onto the legs and let them soak a little.





        Meanwhile, paint glue/varnish onto the plastic. Carefully lift the paper and place on the plastic. Use our fingers to press out any air bubbles.



        Paint glue/varnish on the front of the paper and let dry over night.

        With the thinner plastic, the legs became a little... bent...
        The tougher plastic turned out just fine though! :)
        If your legs look all bent like mine after they dried (sigh), there is a way to fix it. Don't worry!





        Just decoupage a piece of regular paper to the back of the plastic (make sure the front is properly dry first), like you did the legs. Let dry, and the legs will have straightened out reasonably well.



        When the legs have dried properly, use a razor blade or scissors (depending on your plastic material) to cut them out (make sure you have something protecting the surface underneath - I use a flattened cereal box :P). Be very careful and accurate when you cut.


        And there you go! Clock hands in the shape of legs O_o.




        Step 3: Assemble the clockwork

        Now it's time to assemble the clock face and the clockwork. The way to do this might vary depending on what kind of clockwork you have, but I imagine that the process is quite similar at least.


        Anyway, for this step you'll need:

        • Clockwork
        • Clock face
        • Awl

        My clockwork has four parts. You can see the "instructions" for my clockwork in the photo above. 





        First, you need to find the centre of the canvas. Then use the awl to make a hole big enough to fit the clockwork through. My awl is just about the right size. Use your fingers (be careful when pushing the awl, though) or something that isn't fragile to prevent the canvas fabric from being pushed inwards and ruining the clock. 



        My clockwork has a wide rubber ring that goes on first. It's very easy to forget... Then put the clockwork through the hole, and attach the screw on the other side. Make sure to screw it in properly - you may need to widen the hole. There is one screw left for my clockwork, but I'll save that for the next step.

        Finally, I'm going to use the extra print of John Cleese's upper body to cover the golden glimmer of the screw. I'll cut a circle the same size as the screw, make a hole in the middle of it, and simply glue it to the screw. 


        There - done with this step :). Just one more step to go!




        Step 4: Add the hands

        Now the clock is almost finished! For this final step you'll need the following:


        • Clock face with attached clockwork (+ the remaining screw for the clockwork)
        • Clock hands
        • Cut out legs for new hands
        • Glue
        • Awl
        • Pencil
        • Razor blade
        • Wire cutters
        You may not need to buy clock hands at all for this, but I use them since the holes are not circular and for making the clock hands move correctly I don't dare do without them. Also, the hour hand has a bit of a distance so the hands don't come too close to each other. However, I'm going to cut up the hands, so I just bought really cheap ones. 


        Lay out the hands on top of the legs. Make sure they are facing the correct direction - you'll want the holes to be in the right direction as well since the legs have to point to the right numbers. 



        Use a pencil to draw where the hole is. Use the awl and the razor blade (or whatever tools works for you) to make the holes in the legs. Have some kind of protective material underneath the legs while you work (I used the folded cereal box again). Try to put the legs onto the clockwork to make sure the holes are big enough - they might require a little tweaking.



         Now that you have the holes in the legs you can cut off the clock hands so they don't show where the legs bend. Then glue the hands to the legs. 



        Once the glue is properly dry, add the clock hands to the clockwork, and put on the last screw. On my clock it's possible to see some white on the sides of the clock hands from the paper. I used a black marker to paint over this so it wouldn't show. It doesn't have to be perfect, but enough so you don't see the white shine from a distance (I could have done this before putting the hands on the clock, but I've found that my marker doesn't dry properly, so my fingers would get all black when handling the legs - that's why I saved it for last). 


        If necessary, you can glue a small, circular piece of the print out of John Cleese's upper body to hide the top screw.


        Aaaaaaaand - done! I hope you're happy with the result :). I would love to see what you've done, so please send me a photo. If it's all right with you, I'll add it to the page with other people's clocks!



        22 comments:

        1. This is amazing!
          I will prepare two of them as Xmas gifts for some friends, sure they will love it!

          ReplyDelete
        2. This is fantastic, silly walk around the clock! Probably my favourite sketch from Monty Python! When I have time, I will do this clock definitely! (and post a pic for you too!) Thank you so much for sharing this great tutorial!

          ReplyDelete
        3. I'm glad you like it! :) I'm looking forward to seeing your results!

          ReplyDelete
        4. hi
          this clock is incredible! the first time i saw it i knew it was not only a but THE present for my boyfriend...
          so i printed your face-a4-sheet and it turned out to be not as sharp as it appeared to be on your clock..
          may you tell me how you made it look as stunning as it does?
          thank you sooo much!
          anna

          ReplyDelete
          Replies
          1. Hi!
            My image is not perfect, I'm afraid, but it's pretty good at least :). Make sure you print it in 100% (or use an image processing software, but not the printer itself, to reduce the size if necessary). Select, if possible, in your printer properties, not to add margins (or ignore margins - this option can be called different things depending on your printer, I can't remember exactly what it's called on the one I used right now). Choose as high a dpi (dots per inch) as possible - the printer I used can do up to 600 dpi. But as high a number as possible is of course good.

            I hope this helps!

            Regards,
            Susanne

            Delete
        5. This is all kinds of awesome! Have bought all the necessary materials and will start assembling later today. Thank you for sharing your idea and the print file.

          Rosanna

          ReplyDelete
        6. My daughter has requested I make this for her ..question does it keep the correct time ..cant get my head around setting it up ..ie do I have to get a certain clock mechanism size if I want to make a larger clock

          ReplyDelete
          Replies
          1. Hi! The questions whether or not it keeps time depends largely on the clockwork you buy, and I assume also on what material you use for the hands (so it's not too heavy). My clock keeps time really well though (better than many other clocks/watches I have).

            As for the size of the clockwork - no, you don't have to get a larger clockwork in order to make a larger clock. As long as the hands are not too heavy for the clockwork to move them, I can't see why it should be a problem. The size of the clockwork does not decide the size of the clock, since you can't see it, but it does have to have the strength to move the hands.

            Good luck with making the clock!

            Delete
          2. I am very interested in purchasing this Awesome wall click instead of trying to create one. Are they in the market for buying and for how much? Please return an email back to via Wilburlipps@aol.com with reply. Thank you! Sharon Kemp

            Delete
          3. I'm afraid the clock is not for sale (for more info, see the FAQ section). But it's not too difficult to make, so I recommend giving it a try :).

            Delete
        7. Wow this is pretty creative. I was looking for some unique wall clocks for sale its a shame that this one isnt! Looks like i might have to venture to try and make one. Thanks for posting this!

          ReplyDelete
        8. I enjoyed reading your articles. This is truly a great read for me.
          I have bookmarked it and I am looking forward to reading new articles.

          ReplyDelete
        9. fantastic! I'll make one when I have some free time. Thank you :)

          ReplyDelete
        10. I saw this on Google Images, and thought that they looked pretty easy to make. I'm making one tomorrow for a friend who is OBSESSED with Monty Python. Have you considered using a plastic takeaway container or something similar for the legs as an alternative to the plastic folder? Just a thought...

          ReplyDelete
          Replies
          1. Good luck! I'm sure it'll turn out great :). A takeaway container might work, if the plastic isn't too thick - the legs still have to fit the clockwork. But it's surely worth experimenting with!

            Delete
        11. I love the design of this clock! However, sometimes it can be easier to just purchase them! I've just bougth a lovely clock for my dining room from Tick Tock Clocks, who have a wide range of clocks on sale. Here is the link for people who about as creative as me:

          http://www.ticktockclocks.co.uk/

          ReplyDelete
        12. Above clock Collections are good to see accurate time.

          http://www.lootbargain.com also offers branded and designer clocks with warranty to see accurate time.

          ReplyDelete
        13. My fathers birthday is comming up and he LOVES Monty Python. I always find it hard to come up with a good gift, so this is really going to help me out.

          ReplyDelete
        14. I'm looking to make this for my brother, but not sure where to buy the clock hands and clock work. Or could I buy a clock and put the design on it? Thank you

          ReplyDelete
        15. Wow, I nearly bought one a clock similar to this but it looks so much more fun to make! :D Thank You for taking the time to do this!!

          ReplyDelete
        16. I just had to make one of these for my husband. He is such a big Monty Python fan. For the legs I printed them out on copier paper. I enlarged them until the straighter leg measured 8-1/4". Then I printed it out, cut it out and stuck it to a piece of Shrinky Dink plastic. I cut that out, removed the paper and baked it at 325 F. I had folded it between a piece of copier paper because my first one curled onto itself and never released. Inside the folded paper it could only shrink. I did color it with a black Sharpie but ended up painting it black because the marker didn't look very nice. I put gloss finish on it and it worked out much better than my first pair of legs (they kept getting stuck on the top of his head! I need to redo the numbers, they are not as nicely spaced as I would like them to be. I couldn't use the printout because the clock I was putting it on was already cut out round and my printer wouldn't print wider. Hope this helps those who are having problems with the legs. Shrinky Dinks is the way to go!

          ReplyDelete
        17. I was finding out same things on different place. Finally get it from your blog site. So thanks for your post & hope to visit again for more valuable contents. white noise app

          ReplyDelete